 International Journal of Nanomanufacturing (IJNM) ISSN (Online): 1746-9406 - ISSN (Print): 1746-9392
Click to download IJNM leaflet Abstracting/Indexing Services and Journal Lists
The increasing drive towards miniaturisation has dictated that new micro- and nanomanufacturing technologies are developed in parallel with nanotechnology, molecular engineering and biotechnology in order to keep abreast of future technological developments. IJNM provides a principal forum for the interchange of information on the science, process technology and applications of micro- and nanomanufacturing processes.
Objectives
The objectives of IJNM are to establish effective channel of communication on the latest developments in micro- and nanomanufacturing science, processes, technology and applications between engineers, scientists, industry, policy makers, academic and research institutions, and persons concerned with any aspect of nanomanufacturing. The interdisciplinary nature of nanomanufacturing will serve to break down cultural, international and academic barriers to meet the needs of accelerating technological developments in the international community for a global change. Readership
IJNM provides a vehicle to help academics, researchers, industrial companies, trade associations and policy-makers in the fields of manufacturing technology, materials science, engineering, biotechnology, nanotechnology, electronics and business to disseminate information and learn from each other's work. Contents
IJNM publishes original high quality papers, rapid communications, timely review papers, technical reports, case studies. Special Issues devoted to developments in important topics in micro- and nanomanufacturing will be published periodically. Subject Coverage
Topics covered by IJNM include but are not limited to:
- Nanomanufacturing
- Micromanufacturing
- Materials in micromanufacturing and nanomanufacturing
- Tools and processes for micromanufacturing and nanomanufacturing
- Management of micromanufacturing and nanomanufacturing processes
- Micromanufacturing and nanomanufacturing enterprises
Specific Notes for Authors
Submitted papers should not have been previously published nor be currently
under consideration for publication elsewhere. (N.B. Conference papers may only be submitted if the paper has been completely re-written and the author has cleared any necessary permissions with the copyright owner if it has been previously copyrighted). All authors must declare they have read and agreed to the content of the submitted manuscript. A full statement of our Ethical Guidelines for Authors is available.
All papers are refereed through a double blind process. A guide for authors,
sample copies and other relevant information for submitting papers are
available on the Author Guidelines
web-page.
To submit a paper, please go to Submissions of Papers
AUTHORS MUST SUBMIT THEIR PAPERS THROUGH THE ONLINE SUBMISSION SYSTEM, OTHERWISE THEIR PAPERS WILL NOT BE CONSIDERED FOR PUBLICATION All papers must be submitted online. If you experience any problems submitting your paper online, please contact submissions@inderscience.com,
describing the exact problem you experience. Please include in your email the title of the Journal.
Editors and Members of the Editorial Board
Editor(s) in Chief Prof. Fengzhou Fang Tianjin University Centre for Micro/Nano Manufacturing Technology College of Precision Instruments & Opto-Electronics Engineering 92 Weijin Road, Nankai District Tianjin 300072 CHINA fzfang gmail.com Prof. Jack Luo University of Bolton Centre for Materials Research and Innovation (CMRI) Deane Road Bolton BL3 5AB UK j.luo bolton.ac.uk
Regional Editor Asia Prof. Wei Gao Tohoku University Nano-Metrology and Control Laboratory, Center for Precision Nanosystems Department of Nanomechanics Aramaki Aza Aoba 6-6-01 Sendai 980-8579 JAPAN Editorial Board Members Prof. Dr. Ing. Jan C. AurichJa University of Kaiserslautern Lehrstuhl für Fertigungstechnik und Betriebsorganisation Postfach 30 49 67653 Kaiserslautern GERMANY Prof. Dr. Ing. Gerry ByrneGe Dean of Engineering University College Dublin Belfield, Dublin 4 IRELAND Dr. Keith CarlisleKe Director Lawrence Livermore National Laboratory Center for Precision Engineering PO Box 808, Mail Stop L-151 7000 East Avenue Livermore, CA 94550 USA Prof. David A. DornfeldDa University of California at Berkeley Department of Mechanical Engineering 5100A Etcheverry Hall Berkeley, CA 94720-1740 USA Dr. W. Tyler EstlerW. National Institute of Standards and Technology Precision Engineering Division 100 Bureau Drive – Stop 8211 Gaithersburg, MD 20899-8211 USA Prof. John FoordJo University of Oxford Department of Chemistry Chemistry Research Laboratory Mansfield Road Oxford, OX1 3TA UK Prof. Xiaotang HuXi Tianjin University State Key Laboratory of Precision Measuring Technology and Instruments 92 Weijin Road, Nankai District Tianjin 300072 CHINA Prof. Han HuangHa Director, Nanomechanical Testing Laboratory The University of Queensland School of Engineering Brisbane, QLD 4072 AUSTRALIA Prof. Mark J. JacksonMa Purdue University Center for Advanced Manufacturing and Birck Nanotechnology Center College of Technology West Lafayette, IN 47907-2021 USA Prof. Wolfgang KnappWo ETH Zurich Institut für Werkzeugmaschinen und Fertigung CLA G11.2 Tannenstr. 3 8032 Zurich SWITZERLAND Prof. Tsunemoto KuriyagawaTs Director, Centre for Micro/Nano Design and Processing Engineering Tohoku University Department of Nanomechanics Aramaki Aoba 6-6-01 Aoba-ku, Sendai 980-8579 JAPAN Prof. Lin LiLi Head, Manufacturing Research Group; Director, Laser Processing Research Centre University of Manchester School of Mechanical, Aerospace and Civil Engineering H11, Pariser Building Sackville Street Manchester M60 1QD UK Prof. Bingheng LuBi Xian Jiaotong University School of Mechanical Engineering No. 28, Xianning West Road Xian, Shanxi 710049 CHINA Prof. D. A. LuccaD. Oklahoma State University School of Mechanical and Aerospace Engineering 218 Engineering North Stillwater OK 74078 USA Prof. Hitoshi OhmoriHi RIKEN Ohmori Materials Fabrication Lab Hirosawa 2-1, Wako Saitama 351-0198 JAPAN Dr. Ing. Oltmann RiemerOl University of Bremen Laboratory for Precision Machining (LFM) Badgasteiner Straße 2 28359 Bremen GERMANY Prof. Zhongqun TianZh Xiamen University State Key Laboratory of Physical Chemistry of Solid Surfaces Xiamen, Fujian Province 361005 CHINA Prof. Albert A. WeckenmannAl Chair, Quality Management & Manufacturing Metrology University Erlangen-Nuremberg Nagelbachstrasse 25 91052 Erlangen GERMANY Prof. Guoxiong ZhangGu Tianjin University College of Precision Instruments & Opto-Electronics Engineering 92 Weijin Road, Nankai District Tianjin 300072 CHINA Prof. Liangchi ZhangLi University of New South Wales School of Mechanical and Manufacturing Engineering Mechanical Engineering Building (J17) Sydney, NSW 2052 AUSTRALIA Prof. Dr. Libo ZhouLi Ibaraki University Department of Intelligent Systems Engineering Nakanarusawa 4-12-1 Hitachi 316-8511 JAPAN
 |