 International Journal of Materials and Product Technology (IJMPT)
ISSN (Online): 1741-5209 - ISSN (Print): 0268-1900
Abstracting/Indexing Services and Journal Lists
The IJMPT is a refereed and authoritative publication which provides a forum for the exchange of information and ideas between materials academics and engineers working in university research departments and research institutes, and manufacturing, marketing and process managers, designers, technologists and research and development engineers working in industry.
 Objectives
The IJMPT aims to address issues of interest to all industrialists and researchers concerned with new materials, new processes and new products. Readership
Professionals, academics, researchers, industrialists, designers and engineers, market and process managers. Contents
The IJMPT publishes original and review papers, technical reports, case studies, conference reports, management reports, book reviews, and notes, commentaries, and news. Contribution may be by submission or invitation, and suggestions for special issues and publications are welcome. Subject Coverage
- All aspects of technologies related to materials: steels, aluminium, etc., plastics and composites, electronics (solid state) materials, ceramics, corrosion resistant and finishing materials, polymers, resins, rubber products, oils and lubricants
- Materials innovation and technology
- Material selection
- Materials economics and management
- Interaction between materials, design and manufacturing, and other aspects of product technology
- Materials fabrication and design for manufacture: CAD/CAM and CAE/CIM
- Manufacturing methods and technologies
- Joint fixing, bonding and adhesive technology
- Finishing materials, corrosion and protection technology
- Deformation analysis and structural safety
- Failure preventative technology
- National and international product liability
- Technical insurance
- Concurrent engineering of advanced materials
- Smart materials and structures
- Electronic materials and embedded software
- Electronic packaging technology and materials
- TQM
Specific Notes for Authors
Submitted papers should not have been previously published nor be currently
under consideration for publication elsewhere. (N.B. Conference papers may
only be submitted if the paper was not originally copyrighted and if it has
been completely re-written).
All papers are refereed through a double blind process. A guide for authors,
sample copies and other relevant information for submitting papers are
available on the Submission of
Papers web-page.
To submit a paper, please go to Submissions of Papers
AUTHORS MUST SUBMIT THEIR PAPERS THROUGH THE ON LINE SUBMISSION SYSTEM, OTHERWISE THEIR PAPERS WOULD NOT BE CONSIDERED FOR PUBLICATION All papers must be submitted online. If you experience any problems submitting your paper online, please contact submissions@inderscience.com,
describing the exact problem you experience. Please include in your email the title of the Journal.
Editors and Members of the Editorial Board
Editor in Chief Dr. M.A. Dorgham
International Centre for Technology and Management
UK
editorial@inderscience.com
Associate Editor Prof. Dr. Ing. Peter Eyerer
Fraunhofer Institut für Chemische Technologie (ICT)
Joseph-von-Fraunhofer-Straße 7
76327 Pfinztal (Berghausen)
GERMANY American Editor Dr. Vistasp M. Karbhari
Executive Vice-President and Provost
University of Alabama in Huntsville
Huntsville, AL 35805
USA Japanese Editor Prof. Toshiro Kobayashi
Vice President
Toyohashi University of Technology
Tempaku-cho
Toyohashi 441-8580
JAPAN Editorial Board Members Dr. Thomas AstrornTh
Royal Institute of Technology
Dept. of Aeronautics
Stockholm
SWEDEN Dr. Peter BeardmorePe
Former Director
Scientific Laboratory
Ford Motor Co
USA Prof. Michal BesterciMi
Institute of Materials Research
Slovak Academy of Sciences
Watsonova 47
043 53 Kosice
SLOVAKIA Prof. P. CastroP.
Department of Civil Engineering
Universidade Federal Fluminense
CEP 24210-240
São Domingos – Niterói, RJ
BRAZIL Dr. Blaise ChampagneBl
Director-General
Industrial Materials Research Institute
National Research Council of Canada
75 de Montagne Blvd
Boucherville, Quebec J4B 6Y4
CANADA Dr. S. CorsoS.
Director
Fiat Auto Spa
Via Nizza, 250
10125 Turin
ITALY Prof. A.G. EvansA.
Department of Mechanical Engineering and Department of Materials
University of California, Santa Barbara
Santa Barbara, CA 93106-5070
USA Prof. U. GabbertU.
Institut für Mechanik
Otto-von-Guericke-Universität Magdeburg
Postfach 4120
39016 Magdeburg
USA Prof. John W. Gillespie, Jr.Jo
Director
Center for Composite Materials
University of Delaware
Newark DE 19716-3144
USA Prof. Dr. Janez GrumJa
University of Ljubljana
Faculty of Mechanical Engineering
Aškerčeva 6
SI-1000 Ljubljana
SLOVENIA Prof. Dr. Akihisa InoueAk
Institute of Materials Research
University of Tohoku
Aobaku Katahira 2-1-1
Sendai City
JAPAN Prof. Dr. Yutaka KagawaYu
Research Center for Advanced Science and Technology
The University of Tokyo
Institute of Industrial Science
4-6-1 Komaba, Meguro-ku
Tokyo 153-8505
JAPAN Prof. Dr. Kazuro KageyamaKa
Dept. of Naval Architecture and Ocean Engineering
University of Tokyo
7-3-1 Hongo
Bunkyo-ku
Tokyo 113-8656
JAPAN Prof. K.T. KedwardK.
Department of Mechanical Engineering
University of California-Santa Barbara
Santa Barbara CA 93106-5070
USA Dr. Kotobu NagaiKo
National Institute for Material Science
Tsukuba
Ibaraki 305-0047
JAPAN Prof. OIeg M NefedovOI
Russian Academy of Sciences
National Committee of Russian Chemists
14 Leninsky prospect
RU-117901 Moscow GSP-1
RUŠIAN FEDERATION Prof. Dr. Shojiro OchiaiSh
International Inovation Center
Kyoto University
Kyoto 606-8501
JAPAN Prof. Yang PingYa
Jiangsu University
School of Mechanical Engineering
Xuefu Road 301
212013 Zhenjiang
P.R. CHINA Prof. A. PlumtreeA.
Department of Mechanical Engineering
University of Waterloo
Waterloo, Ontario N2L 3G1
CANADA Dr. John QuinlivanJo
Vice-president
Boeing Commercial Airplane Co.
P. O. Box 3707
Seattle WA 98124
USA Dr. Valery RudnevVa
Group Director
Science & Technology
INDUCTOHEAT Group
32251 North Avis Drive
Madison Heights MI 48071
USA Prof. George S. SpringerGe
Paul Pigott Professor of Engineering
Department of Aeronautics and Astronautics
Stanford University
Stanford CA 94305-4035
USA Prof. Edgar A. Starke, JrEd
Department of Materials Science and Engineering
University of Virginia
P.O. Box 400745
116 Engineer's Way
Charlottesville VA 22904-4745
USA Dr. E.C. SubbaraoE.
C/o Tata Research Development and Design Centre
54B, Hadapsar Industrial Estate
Pune 411 013, Maharashtra
INDIA Prof. Ramesh TalrejaRa
Tenneco Professor
Department of Aerospace Engineering
Texas A&M University
3141 TAMU
College Station TX 77843-3141
USA Dr. George E. TottenGe
G.E. Totten & Associates, Inc., P.O. Box 30108, Seattle, WA 98103; and
Portland State University
Department of Mechanical and Materials Engineering
P.O. Box 751
Portland, OR 97207
USA Prof. Dr. Rui VilarRu
Instituto Superior Técnico
Av. Rovisco Pais, 1
1049-001 Lisboa
PORTUGAL Dr. Heinz VoggenreiterHe
Senior Manager
Corporate Research and Technology
EADS Headquarters
Paris
FRANCE Prof. Dr. Lothar WagnerLo
Lehrstuhl Allgemeine Werkstofftechnik
Brandenburgische Technische Universität Cottbus
GERMANY Prof. Fuhui WangFu
Director
State Key Laboratory for Corrosion and Protection Institute of Metal Research
Chinese Academy of Sciences
Wecui Road 62
Shenyang 110016
P.R. CHINA Dr. J.C. WilliamsJ.
General Manager
Engineering Materials Technology Labs
GE
Cincinnati OH
USA Prof. Hiroo YonezuHi
Dept. of Electrical and Electronic Engineering
Toyohashi University of Technology
1-1 Hibarigaoka
Tempakucho
Toyohashi-shi, Aichi 441-8580
JAPAN
Total hits from Jan 1, 2009: 15463 |
Latest TOC
