 International Journal of Abrasive Technology (IJAT)
ISSN (Online): 1752-265X - ISSN (Print): 1752-2641
Click to download IJAT leaflet Abstracting/Indexing Services and Journal Lists
Abrasive technology concerns the manufacturing processes that involve the use of abrasives in a variety of forms. It has a long history originating from the discovery of minerals. With the increasing requirements for the production of high precision and high surface quality components in various applications, such as silicon wafers in the semiconductor industry and optical lenses in the precision instrument industry, abrasive technology is becoming increasingly important in precision manufacturing.
IJAT is a fully refereed journal that publishes peer-reviewed quality papers in the area of abrasive technology covering theoretical and applied research, new technologies and applications.
 Objectives
The objectives of IJAT are to provide a prime forum and communication channel for the interchange of information among academic researchers and industrial practitioners on the science, technologies and applications associated with precision and abrasive processing engineering. Readership
Academics, researchers, industrial practitioners and university students specialising in manufacturing processes, precision engineering, abrasive processes and related fields. Contents
IJAT publishes original research papers, review papers, technical papers and notes, short communications, case studies, and book reviews. Special issues devoted to the development of important topics in abrasive technology will be published periodically to compile selected papers from submissions to significant international conferences and symposiums and invited papers from prominent researchers. Subject Coverage
Topics covered by IJAT include, but are not limited to, the following:
- Grinding, finishing, deburring, lapping, polishing, honing etc.
- Truing, dressing and ELID for grinding
- Abrasive jet (AWJ, AAJ etc.) machining and other processes
- Equipment and technology for abrasive jet machining/processing
- Abrasive flow machining
- Loose and suspended abrasive particle machining/polishing
- Hybrid super-finishing processes: electro-abrasive processes, laser assisted abrasive processes, CMP, CMG, etc.
- In-process measurement and monitoring for precision/ultra-precision machining
- Abrasives and tools for abrasive processes
- Machine tools/equipment for precision/ultra-precision and abrasive machining
- Micro-machining
- Super-finish/nano-surfacing
- Silicon wafer and brittle material processing
- Surface characterisation and evaluation
- Metrology applied to precision/ultra-precision machining
- Ecological and environmentally-friendly coolants and cooling techniques
- Tribology in precision and abrasive processes
- Teaching and learning innovations in abrasive engineering and technology
Specific Notes for Authors
Submitted papers should not have been previously published nor be currently
under consideration for publication elsewhere. (N.B. Conference papers may only be submitted if the paper has been completely re-written and the author has cleared any necessary permissions with the copyright owner if it has been previously copyrighted). All authors must declare they have read and agreed to the content of the submitted manuscript. A full statement of our Ethical Guidelines for Authors is available.
All papers are refereed through a double blind process. A guide for authors,
sample copies and other relevant information for submitting papers are
available on the Author Guidelines
web-page.
To submit a paper, please go to Submissions of Papers
AUTHORS MUST SUBMIT THEIR PAPERS THROUGH THE ONLINE SUBMISSION SYSTEM, OTHERWISE THEIR PAPERS WILL NOT BE CONSIDERED FOR PUBLICATION All papers must be submitted online. If you experience any problems submitting your paper online, please contact submissions@inderscience.com,
describing the exact problem you experience. Please include in your email the title of the Journal.
Editors and Members of the Editorial Board
Editor in Chief Prof. Jun Wang
Research Champion in Advanced Manufacturing
The University of New South Wales
School of Mechanical and Manufacturing Engineering
Sydney, NSW 2052
AUSTRALIA
jun.wang unsw.edu.au
Associate Editors Prof. Chuanzhen Huang
Director, Centre for Advanced Jet Engineering Technology
Shandong University
School of Mechanical Engineering
73 Jinshi Road
Jinan 250061
CHINA Prof. Dr. Libo Zhou
Ibaraki University
Department of Intelligent Systems Engineering
Nakanarusawa 4-12-1
Ibaraki
Hitachi 316-8511
JAPAN American Editor Prof. Ioan D. Marinescu
Director, Precision Micro-Machining Centre
The University of Toledo
Mechanical, Industrial & Manufacturing Engineering Department
2901 W. Bancroft St.
Toledo, OH 43606
USA Far East Editor Prof. Hang Gao
Dalian University of Technology
School of Mechanical Engineering
Dalian 116024
CHINA Advisory Editors Prof. Tsunemoto Kuriyagawa
Director, Centre for Micro/Nano Design and Processing Engineering
Tohoku University
Department of Nanomechanics
Aramaki Aoba 6-6-01
Aoba-ku, Sendai 980-8579
JAPAN Prof. Liangchi Zhang
University of New South Wales
School of Mechanical and Manufacturing Engineering
Mechanical Engineering Building (J17)
Sydney, NSW 2052
AUSTRALIA Editorial Board Members Prof. Christopher A. BrownCh
Professor of Mechanical Engineering
Worcester Polytechnic Institute
Center for Advanced Abrasive Processes and Surface Metrology Lab Director
100 Institute Road
Worcester, MA 01609-2280
USA Prof. Guangqi CaiGu
Northeastern University
School of Mechanical Engineering
Shenyang 110006
CHINA Prof. Xun ChenXu
Professor of Manufacturing
Liverpool John Moores University
General Engineering Research Institute
Liverpool L3 3AF
UK Prof. Yongsheng GaoYo
Hong Kong University of Science and Technology
Department of Mechanical Engineering
Clear Water Bay
Kowloon
HONG KONG Prof. Ernest S. GeskinEr
New Jersey Institute of Technology
Department of Mechanical Engineering
University Heights
Newark, NJ 07102-1982
USA Prof. Dongming GuoDo
Dalian University of Technology
School of Mechanical Engineering
Dalian 116024
CHINA Prof. Peter HodgsonPe
ARC Federation Fellow and Alfred Deakin Professor
Deakin University
Centre for Material and Fibre Innovation
Faculty of Science and Technology
Geelong, Victoria 3217
AUSTRALIA Prof. Han HuangHa
Director, Nanomechanical Testing Laboratory
The University of Queensland
School of Engineering
Brisbane, QLD 4072
AUSTRALIA Prof. Mark J. JacksonMa
Purdue University
Center for Advanced Manufacturing and Birck Nanotechnology Center
College of Technology
West Lafayette, IN 47907-2021
USA Prof. Renke KangRe
Director, Institute of Advanced Manufacturing Technology
Dalian University of Technology
School of Mechanical Engineering
Dalian 116024
CHINA Prof. Sunglim KoSu
Konkuk University
Department of Mechanical Engineering
1 Hwayang-dong, Kwangjin-gu
Seoul 143-701
KOREA, REPUBLIC OF Prof. Xiaoping LiXi
Director of Neurosensors Laboratory
National University of Singapore
Department of Mechanical Engineering & Division of Bioengineering
9 Engineering Drive 1
Singapore 117576
SINGAPORE Prof. Yunn-Shiuan LiaoYu
National Taiwan University
Department of Mechanical Engineering
No. 1, Sec. 4, Roosevelt Rd.
Taipei 106
TAIWAN Dr. Michael MorganMi
Reader and Manager,Advanced Manufacturing Technology Research Laboratory
Liverpool John Moores University
General Engineering Research Institute (GERI)
Liverpool L2 2SR
UK Prof. Soumitra PaulSo
Coordinator, Machine Tool and Machining Laboratory
Indian Institute of Technology Kharagpur
Department of Mechanical Engineering
Kharagpur, West Bengal 721 302
INDIA Dr. Thomas PearceTh
Director, Institute of Grinding Technology, RAMP Laboratory
University of the West of England
Institute of Grinding Technology, RAMP Laboratory
Faculty of Computing, Engineering & Mathematical Sciences
Frenchay Campus, Coldharbour Lane
Bristol BS16 1QY
UK Prof. Dr. Jun’ichi TamakiJu
Kitami Institute of Technology
Department of Mechanical Engineering
165 Koen-cho
Kitami
090-8507
JAPAN Prof. Dr. Taghi TawakoliTa
Institute Director
Hochschule Furtwangen University
Institute of Grinding and Precision Technology, KSF
78054 Villingen-Schwenningen
GERMANY Prof. Andrew TorranceAn
Trinity College
Department of Mechanical and Manufacturing Engineering
Dublin 2
IRELAND Prof. Pei-Lum TsoPe
Professor of Power Mechanical Engineering
National Tsing-Hua University
Power Mechanical Engineering Department
Hsin-Chu
TAIWAN Prof. Chengyong WangCh
Director, Institute of Manufacturing Technology
Guangdong University of Technology
School of Mechanical and Electrical Engineering
Guangzhou 510090
CHINA Prof. Yongbo WuYo
Akita Prefectural University
Department of Machine & Intelligence Systems Engineering
Ebinokuchi 84-4, Tsuchiya, Honjo
Akita 015-0055
JAPAN Prof. Xipeng XuXi
Director, Fujian Provincial Key Research Laboratory for Stone Machining; Vice President
Huaqiao University
Quanzhou, Fujian 362021
CHINA Prof. Nobuhito YoshiharaNo
Associate Professor
Iwate University
Department of Mechanical Engineering
4-3-5 Ueda, Morioka
Iwate 020-8551
JAPAN Prof. Julong YuanJu
Director of Centre
Hunan University
China National Engineering Research Center for High Efficiency Grinding
Changsha, Hunan 410082
CHINA Prof. Bi ZhangBi
University of Connecticut
Department of Mechanical Engineering
191 Auditorium Road, Unit 31319
Storrs, Connecticut 06269-3139
USA
|
RSS feeds
Latest TOC
