Pages | Title and author(s) |
114-123 | Study on normal grinding force in ultrasonic aided grinding of sintered Nd-Fe-B permanent magnetJ.H. Zhang, S.F. Ren, Y.J. Hu, L. Li, M.G. Xu DOI: 10.1504/IJMTM.2008.016766 |
124-145 | Micromachining of bipolar plates used in proton exchange membrane fuel cellsMark J. Jackson, Grant M. Robinson, Mike P. Brady DOI: 10.1504/IJMTM.2008.016767 |
146-168 | Analytical prediction of stability lobes in high-speed milling and their application to micromillingL. Samrajya Lakshmi, V. Vasu, Prasad Krishna, B. Nageswara Rao, S. Rakesh DOI: 10.1504/IJMTM.2008.016768 |
169-186 | Soft-pad grinding of 300 mm wire-sawn silicon wafers: finite element analysis with designed experimentsJian (Jessie) Wu, Xuekun Sun, Z.J. Pei, X. Jack Xin, Kelli Simmelink DOI: 10.1504/IJMTM.2008.016769 |
187-200 | Fabrication and characterisation of nitrogen-doped diamond microtoolsMark J. Jackson DOI: 10.1504/IJMTM.2008.016770 |
201-213 | Analysis of heat affected zone in the micro-electric discharge machiningOlivier Thao, Suhas S. Joshi DOI: 10.1504/IJMTM.2008.016771 |
214-225 | Experimental investigation into electrochemical discharge microdrilling on advanced ceramicsB.R. Sarkar, B. Doloi, B. Bhattacharyya DOI: 10.1504/IJMTM.2008.016772 |
226-240 | Study of WEDM parameter phenomena for microfabricationSadiq M. Alam, Mustafizur Rahman, H.S. Lim DOI: 10.1504/IJMTM.2008.016773 |
241-253 | Microgroove pattern machined by excimer laser draggingHong Hocheng, Kuan-Yu Wang DOI: 10.1504/IJMTM.2008.016774 |
254-264 | Analysis of edge effects on flexible forming of sheet metal using plasma arcWenbin Wu, Wenji Xu, Zhongying Wang, Jinjin Zhou DOI: 10.1504/IJMTM.2008.016775 |
265-279 | Influence of process parameters on joining strength in microplasma arc weldingKueng-Hueng Tseng, Min Jou, Yun Chang, Her-Yueh Huang DOI: 10.1504/IJMTM.2008.016776 |
280-296 | Determination of thermal stress distribution in metallic layer during selective laser sintering using finite element methodPatil Makarand Ramu, Vinod Yadava DOI: 10.1504/IJMTM.2008.016777 |
297-307 | Bulk micromachining for SOI based microsystems using double side XeF2 etchingAvinash K. Bhaskar, Muthukumaran Packirisamy, Rama B. Bhat DOI: 10.1504/IJMTM.2008.016778 |
308-323 | Parametric analysis of magnetorheological abrasive flow finishing processSunil Jha, Vijay Kumar Jain DOI: 10.1504/IJMTM.2008.016779 |
324-343 | Principle and applications of MEMS: a reviewN.P. Mahalik DOI: 10.1504/IJMTM.2008.016780 |
344-359 | Review of MEMS metrology solutionsJames F. Nichols, Meghan Shilling, Thomas R. Kurfess DOI: 10.1504/IJMTM.2008.016781 |
360-375 | Carbon as a MEMS material: micro and nanofabrication of pyrolysed photoresist carbonChunlei Wang, Rabih Zaouk, Benjamin Y. Park, Marc J. Madou DOI: 10.1504/IJMTM.2008.016782 |