Title: A review note on control chart systems for monitoring multi-stage and multi-stream manufacturing systems
Authors: M. Shamsuzzaman
Addresses: Department of Industrial Engineering and Engineering Management, College of Engineering, University of Sharjah, P.O. Box 27272, Sharjah, United Arab Emirates
Abstract: A multi-stage and multi-stream manufacturing system has several process stages each of which consists of one or more streams (e.g., machines) depending on some factors (e.g., bottleneck machines, different production rates). A number of methods were developed for implementing statistical process control (SPC) for single stage multi-stream manufacturing processes. However, few articles that considered developing charting schemes (known as integrated control chart systems) for monitoring multi-stage and multi-stream manufacturing processes as a whole can be found. This article reviews the available literatures on the design of the control chart system and discusses the basic procedures for the designs of the integrated control chart systems for monitoring multi-stage and multi-stream manufacturing systems. Finally, some future research directions are given.
Keywords: multi-stage manufacturing systems; multi-stream manufacturing systems; control charts; quality control; statistical process control; SPC; manufacturing system monitoring.
DOI: 10.1504/IJISE.2016.080287
International Journal of Industrial and Systems Engineering, 2016 Vol.24 No.4, pp.423 - 440
Received: 08 Sep 2014
Accepted: 27 Jan 2015
Published online: 11 Nov 2016 *