Title: Grain exfoliation and control thereof in ultra-precision plane honing of AlN substrates
Authors: Shinya Suzuki, Tsunemoto Kuriyagawa, Jiwang Yan, Nobuhito Yoshihara
Addresses: Department of Nanomechanics, School of Engineering, Tohoku University, Aoba 6-6-01, Aramaki, Aoba-ku, Sendai 980-8579, Japan. ' Department of Nanomechanics, School of Engineering, Tohoku University, Aoba 6-6-01, Aramaki, Aoba-ku, Sendai 980-8579, Japan. ' Department of Nanomechanics, School of Engineering, Tohoku University, Aoba 6-6-01, Aramaki, Aoba-ku, Sendai 980-8579, Japan. ' Department of Nanomechanics, School of Engineering, Tohoku University, Aoba 6-6-01, Aramaki, Aoba-ku, Sendai 980-8579, Japan
Abstract: Aluminium Nitride (AlN) has been in high demand for semiconductor substrates and heat-radiation packaging materials. However, in planarisation processing such as grinding and loose abrasive methods, material characteristics deteriorate because of generation of cracks and exfoliation of AlN grains. Therefore, the authors have investigated machining of AlN by means of an ultra-precision plane honing method. This method can realise high-efficiency and low-damage machining of hard and brittle materials, by virtue of total contact between the workpiece and the grinding wheel. In this study, microindentation and scratch tests were performed in order to understand the mechanism of brittle fracture and to obtain basic knowledge for setting optimum machining conditions. The results show that the rough grinding process is accompanied by generation of surface or internal cracks and that the ductile mode, where scratch depth is less than 0.3 µm, is characterised by few cracks and exfoliation of AlN grains.
Keywords: aluminium nitride; AlN grains; plane honing; cracks; grain exfoliation; indentation tests; scratch tests; fracture toughness; ductile mode; brittle mode; ultraprecision machining; microindentation; rough grinding; scratch depth.
DOI: 10.1504/IJMMM.2007.012665
International Journal of Machining and Machinability of Materials, 2007 Vol.2 No.1, pp.37 - 49
Published online: 06 Mar 2007 *
Full-text access for editors Full-text access for subscribers Purchase this article Comment on this article