Title: Multi-objective optimisation for indentation rate, nugget diameter and tensile load in resistance spot welding using Taguchi-based grey relational analysis

Authors: Celalettin Yuce

Addresses: Department of Mechatronics Engineering, Bursa Technical University, 16310, Yildirim-Bursa, Turkey

Abstract: In this study, a multi-objective optimisation method based on grey relational analysis with weighted responses is conducted to optimise the RSW parameters of electrode force, welding current, and welding time. Three objectives, such as indentation rate, nugget diameter, and tensile load, are simultaneously optimised. In order to assign the optimum level for each parameter individually, the Taguchi technique was applied. ANOVA results showed that the most influential parameters on indentation rate, nugget diameter, and tensile load are welding current, welding time, and welding current, respectively. In the grey relational analysis, the grey relational grades were obtained using weighted responses. The weight factors for the indentation rate, nugget diameter, and tensile load are 33.24%, 35.67%, and 31.1%, respectively. The optimum parameter combination was obtained as 2,500 N, 9 kA, and 0.5 s. Under these parameter combinations, indentation rate, nugget diameter, and tensile load were 26.2%, 8.34 mm, and 20.04 kN, respectively.

Keywords: grey relational analysis; GRA; resistance spot welding; RSW; multi-objective optimisation; weighted factors.

DOI: 10.1504/IJMPT.2021.118352

International Journal of Materials and Product Technology, 2021 Vol.63 No.4, pp.321 - 338

Received: 22 Dec 2020
Accepted: 29 May 2021
Published online: 22 Oct 2021 *

Full-text access for editors Full-text access for subscribers Purchase this article Comment on this article