Title: Research on partially filled characteristics of vehicular hydrodynamic retarders

Authors: Lingxing Kong; Wei Wei; Hongbin Mu; Qingdong Yan

Addresses: National Key Laboratory of Vehicular Transmission, Beijing Institute of Technology, Beijing, 100081, China; Institute of Advanced Technology, Beijing Institute of Technology, Jinan, 250300, China ' National Key Laboratory of Vehicular Transmission, Beijing Institute of Technology, Beijing, 100081, China ' National Key Laboratory of Vehicular Transmission, Beijing Institute of Technology, Beijing, 100081, China ' National Key Laboratory of Vehicular Transmission, Beijing Institute of Technology, Beijing, 100081, China

Abstract: Hydrodynamic retarders are widely used on heavy vehicles as auxiliary braking components. Figuring out the partially filled characteristics is of practical significance for the design and control of retarders. In this paper, torque characteristics under variable filling rate of a dual-torus hydrodynamic retarder is studied and verified with experimental data. 1D flow theory was implemented to calculate the circulating flow rate and brake torque. 3D CFD simulation was conducted and VOF model was adopted to simulate air-oil two phase flow when the chamber is partially filled. The results showed that unlike common assumption that brake torque is in direct proportion with filling ratio of the chamber, the torque presents a non-linear relationship vs. filling ratio. In the bench test, filling ratio is derived by monitoring the flow rate into and out from the chamber and the experimental results validated the non-linear relationship between brake torque and filling ratio.

Keywords: brake torque characteristics; CFD; computational fluid dynamics; filling ratio; vehicular hydrodynamic retarder; two phase flow.

DOI: 10.1504/IJHVS.2020.112973

International Journal of Heavy Vehicle Systems, 2020 Vol.27 No.6, pp.817 - 839

Received: 30 May 2018
Accepted: 06 Nov 2018
Published online: 12 Feb 2021 *

Full-text access for editors Full-text access for subscribers Purchase this article Comment on this article