Leather manufacturing by using treated municipal wastewaters Online publication date: Wed, 24-Feb-2016
by Monica Puccini; Sandra Vitolo; Maurizia Seggiani; Domenico Castiello
International Journal of Environment and Waste Management (IJEWM), Vol. 16, No. 4, 2015
Abstract: Leather processing requires copious amounts of freshwater, approximately between 15 and 20 L per kg of raw hide. The possibility of reusing reclaimed municipal wastewaters in the leather production assumes a great significance, proving a sustainable solution to the conservation of the groundwater reserves. In the present work, a combination of a membrane bioreactor (MBR) and nanofiltration (NF) membrane processes was investigated for the municipal wastewater reclamation, and their performances were evaluated and designed to meet water quality criteria required by the wet stages of tanning process. The results showed that the municipal wastewaters treated by combing MBR and NF met the required quality criteria in terms of total/permanent hardness, Fe, Mn and ammonium contents. The quality of the leathers produced both on pilot and industrial scale using treated water did not show any significant difference in terms of physical and technical properties, and satisfied fully the tannery specifications.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Environment and Waste Management (IJEWM):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com
Our Blog 
Follow us on Twitter 
Visit us on Facebook