Mechanical properties of GRP composites with localised thermal damage Online publication date: Wed, 02-Jul-2003
by Z. Mathys, C.P. Gardiner, A.P. Mouritz, C.R. Townsend
International Journal of Materials and Product Technology (IJMPT), Vol. 17, No. 1/2, 2002
Abstract: The effect of thermal damage on the mechanical properties of glass-reinforced polyester (GRP) composites is investigated. GRP panels underwent surface heating to high temperature (750-800° C) in a cone calorimeter to create localised regions of thermal damage having a circular, oval, square, diamond or irregular shape. The size of the heat-affected region ranged from 10% to 100% of the panel width. The heat damage consisted mostly of char from combustion of the polyester matrix and delamination cracks. After heating in the cone calorimeter, the GRP was cooled to room temperature and then the residual tension and compression properties were determined. Increasing the size and depth of the fire damage zone caused reductions to the stiffness and strength of the GRP. It was found that the shape of the heat-damaged region did not affect the mechanical properties. A model is presented for accurately determining the tension and compression properties of composites with localised heat damage of any shape.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Materials and Product Technology (IJMPT):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com
Our Blog 
Follow us on Twitter 
Visit us on Facebook