Effects of noise and distortion in measurement of room impulse response by swept sine technique Online publication date: Wed, 17-Jul-2013
by Dejan G. Ćirić; Aleksandar Pantić; Dragana Radulović
International Journal of Reasoning-based Intelligent Systems (IJRIS), Vol. 5, No. 1, 2013
Abstract: Swept sine technique is one of the most used techniques for measurement of the impulse response of acoustical systems including rooms. During its application, some common disturbances, such as noise and distortion, could reduce the quality of the measurement results. Two different noise categories can be distinguished - background noise always present in room acoustic measurements and transient noise that appears suddenly and has a short duration. Distortion typically occurs in the transducer. The effects of these disturbances (especially transient noise and distortion) are investigated here with an emphasis on reduction of negative effects of transient noise. For that purpose, several procedures for noise effects reduction are proposed and analysed. The results show that noise and distortion cause certain artefacts disturbing the measured response. Some of these artefacts can be reduced by applying adequate procedures.
Online publication date: Wed, 17-Jul-2013
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Reasoning-based Intelligent Systems (IJRIS):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email email@example.com