3D simulation of arc envelope grinding of non-axisymmetric aspheric surface Online publication date: Tue, 06-Mar-2007
by J. Xie, W.W. Xu, J. Tamaki
International Journal of Machining and Machinability of Materials (IJMMM), Vol. 2, No. 1, 2007
Abstract: A new simulation method for envelope grinding of non-axisymmetric aspheric surface was proposed by using 3D virtual curve grinding without complex mathematical calculations. The aim is to verify 3D distribution of envelop traces and form errors on ground curve surface. First, 3D objects of arc-shaped grinding wheel and workpiece were established in AutoCAD, then Boolean operation was conducted to simulate form grinding by AutoLISP program, finally tool path number and form errors were analysed. Grinding experiments proved the validity of this simulation method. It was shown that 3D envelope traces and form errors distribution can be displayed by simulation for tool path planning and form error compensation. It was confirmed that equal-envelope-height grinding can greatly reduce tool paths when precision grinding of very large curvature is conducted. In addition, form accuracy PV only increases 4.17 µm in the range of 200 × 20 mm² for wheel radial wear of 1 mm.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Machining and Machinability of Materials (IJMMM):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com