Nickel nanoparticles loaded on ceria oxide spheres as catalyst for dry reforming of methane Online publication date: Fri, 20-Nov-2020
by Diep Ngoc Le; Phuc Hoan Tu; Dung Trung Dao; Tin Chanh Duc Doan; Chien Mau Dang
International Journal of Nanotechnology (IJNT), Vol. 17, No. 7/8/9/10, 2020
Abstract: In this paper, nickel particles were loaded on ceria oxide flowers dispersed on a framework of inorganic fibres as catalyst for dry reforming of methane. The tests of dry reforming of methane were performed at 700-800°C. With the Ni/Ce flowers, at 700°C, 750°C and 800°C initial CH4 conversion and after 100 h were 85-63%, 93-88%, 96-87%, respectively. Without the dispersion of ceria oxide flowers, CH4 conversion was 96-70% at 800°C. The samples were reactivated after 100 h of reforming at 800°C and then the reforming reaction was performed again for another 100 h. It was found that the conversion of CH4 after reactivation was higher and more stable than the original catalyst by a few per cent.
Online publication date: Fri, 20-Nov-2020
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Nanotechnology (IJNT):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email email@example.com