Prediction of the cutting forces in gear hobbing and the wear behaviour of the individual hob cutting teeth Online publication date: Fri, 07-Sep-2018
by Mattias Svahn; Lars Vedmar; Carin Andersson
International Journal of Manufacturing Research (IJMR), Vol. 13, No. 4, 2018
Abstract: In this paper, a mathematical model is presented, by which the cutting forces in a gear hobbing process and the wear behaviour of the hob's all cutting teeth are predicted. The load on each individual hob cutting tooth varies heavily in the gear hobbing process. To predict the cutting force, and subsequently the tool wear, a detailed determination of the chip geometry is needed. The undeformed chip geometry is continuously determined by analytical differential description presented in previous research. In the model all cut chips are determined for the full production cycle of a gear blank, where the gear blank boundaries are considered. Considering the full production cycle is needed to get an understanding of the load the tool will experience and the wear behaviour of the hob teeth. [Submitted 17 January 2017; Accepted 24 November 2017]
Online publication date: Fri, 07-Sep-2018
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Manufacturing Research (IJMR):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email firstname.lastname@example.org