Fabrication and mechanical characterisation of carbon fabric reinforced epoxy with alumina and molybdenum disulfide fillers Online publication date: Wed, 20-Dec-2017
by Bheemappa Suresha; Manpinder Singh Saini
International Journal of Computer Aided Engineering and Technology (IJCAET), Vol. 10, No. 1/2, 2018
Abstract: In this research article, a systematic study has been carried out to investigate the mechanical properties of carbon fabric reinforced epoxy (C-E) composites, having alumina (Al2O3) in one instance and molybdenum disulfide (MoS2) of two different loadings in the epoxy matrix resin The study has revealed that with 60 wt.% carbon fabric loading brings superior mechanical properties to the epoxy matrix. The micron-phased (Al2O3/MoS2 in epoxy resin) matrix is then utilised with T300 carbon fabric performs to fabricate hybrid laminated composites. The resulting structural hybrid composites have been tested under tensile and flexural loads to evaluate mechanical properties. The fillers were micron-sized Al2O3/MoS2 particles which were mixed with epoxy resin using high shear mixer. The amount of particle loading varied in two steps viz. 5% and 10% by weight. It has been observed that microparticles inclusion increases the thermal stability of the system by enhancing cross-linking in the epoxy matrix. Microparticles also tend to reduce air void content of the as-fabricated hybrid composites and thus translate into increased mechanical properties. With 10 wt.% loading of MoS2 in C-E enhanced the flexural strength and modulus by 20 and 40% respectively.
Online publication date: Wed, 20-Dec-2017
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Computer Aided Engineering and Technology (IJCAET):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email email@example.com