Experimental investigation on the machinability of SiC nano-particles reinforced magnesium nanocomposites during micro-milling processes Online publication date: Wed, 29-Jan-2014
by Juan Li; Jian Liu; Jinling Liu; Yingfeng Ji; Chengying Xu
International Journal of Manufacturing Research (IJMR), Vol. 8, No. 1, 2013
Abstract: This paper experimentally investigates the machinability of magnesium metal matrix composites (Mg-MMCs) with high volume fractions of SiC nano-particles using micro-milling process. The nanocomposites containing 5 vol.%, 10 vol.% and 15 vol.% reinforcements of SiC nano-particles were studied and compared with pure magnesium. The milling was carried out at different feedrates and spindle speeds chosen according to design of experiment (DOE) method. Cutting forces, surface morphology and surface roughness were measured to understand the machinability of the four different materials. Based on response surface methodology (RSM) design, experimental models and related contour plots were developed to build a connection between material properties and cutting parameters. Those models can be used to predict the cutting force, the surface roughness, and then optimise the machining conditions with the required cutting forces and surface roughness. [Received 8 June 2011; Revised 21 November 2011; Accepted 3 March 2012]
Online publication date: Wed, 29-Jan-2014
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Manufacturing Research (IJMR):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email email@example.com