Experimental investigations of a combustion chamber pre-diffuser Online publication date: Mon, 10-May-2004
by B. Becker, B. Stoffel
Progress in Computational Fluid Dynamics, An International Journal (PCFD), Vol. 4, No. 3/4/5, 2004
Abstract: The flow in gas turbines is characterised by a high level of non uniformities due to combustion effects and instabilities of the surrounding turbomachines. It is assumed that the wakes issuing from the upstream axial compressor interact with the combustion process in the flame tube. The diffuser which is positioned between the compressor and the flame tube is of particular importance for the inlet flow conditions of the combustion. This paper is concerned with the characterisation of the flow field in and at the exit of the pre-diffuser. Experimental investigations have been done to get information about the flow behaviour in the diffuser. All measurements have been acquired using a modelled annular combustion chamber test facility with a simulated one stage axial compressor in front of it.
Online publication date: Mon, 10-May-2004
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the Progress in Computational Fluid Dynamics, An International Journal (PCFD):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email firstname.lastname@example.org