In-sodium self-welding susceptibility evaluation of chromium-plated 2.25Cr-1Mo steel with Inconel 82 weld metal Online publication date: Wed, 06-Feb-2008
by Hemant Kumar, S.K. Albert, V. Ramakrishnan, C. Meikandamurthy, R. Vijayashree, A.K. Bhaduri
International Journal of Nuclear Energy Science and Technology (IJNEST), Vol. 3, No. 4, 2007
Abstract: The self-welding susceptibility of Cr-plated 2.25Cr-1Mo steel with Inconel 82 weld metal, with and without Cr-plating, has been evaluated in flowing sodium at 823 K for three and six months under contact stress of 3.0 MPa. Tests were performed on flat-on-flat geometry of hollow cylindrical specimens under compression. No self-welding was observed in either test for either material combination. Scanning electron micrographs of the tested specimens showed no damage in the surface. The paper discusses the experimental set-up and the results of self-welding susceptibility studies on these material combinations.
Online publication date: Wed, 06-Feb-2008
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Nuclear Energy Science and Technology (IJNEST):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email firstname.lastname@example.org