Studies on the specific drills for austenitic stainless steel 1Cr18Ni9Ti Online publication date: Tue, 06-Feb-2007
by Ming Chen, Gang Liu, Lulu Jing, Jingwen Zhong, Fanghong Sun
International Journal of Computer Applications in Technology (IJCAT), Vol. 28, No. 1, 2007
Abstract: Specific drills are developed for austenitic stainless steel 1Cr18Ni9Ti. The drills are designed by UG software and fabricated by ANCA TGX multiaxis CNC tool grinding machine. Three different coatings, TiN, TiAlN and TiCN, are utilised by PLATIT PL1000 coating system. Drilling performance is evaluated by chip deformation coefficient, thrust force, torque, cutting temperature and cutting tool failure mechanism. Results indicate that a new specific drill with split point surface, 138°point angle and 38°helix angle is suitable for 1Cr18Ni9Ti. Compared to the commercial available standard uncoated drill, the new uncoated drill makes thrust force decrease 40% and torque decrease 35% under the same cutting parameters. TiN -coated drill, TiAlN- coated drill and TiCN -coated drills yield good cutting performance and tool life increases by 138%, 188% and 255%, respectively. A new specific drill with TiCN coating is appropriate in drilling of 1Cr18Ni9Ti with long tool life and high material removal rate.
Online publication date: Tue, 06-Feb-2007
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Computer Applications in Technology (IJCAT):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email email@example.com