Study of radiolytic gas bubbles formation and behaviour in an aqueous uranyl sulphate solution using ImageJ
by Daniel Milian Pérez; Daylen Milian Pérez; Liván Hernández Pardo; Daniel E. Milian Lorenzo; Abel Gámez Rodríguez; Antônio Celso Dantas Antonino; Carlos A. Brayner De Oliveira Lira
International Journal of Nuclear Energy Science and Technology (IJNEST), Vol. 14, No. 3, 2020

Abstract: This paper delves into the study of the radiolytic gas bubbles formation in uranium salt solutions using the ImageJ software for the determination of parameters of interest of the gas bubbles. In this way the gas bubbles diameter, gas bubbles velocity and local gas volume fraction for three electron bean power levels, 6, 12 and 15 kW were determined. It was determined that the radiolytic gas bubbles average diameter varies between 200 and 300 μm, increasing with the increase in power. A similar behaviour was observed for the bubble velocity, which increases accordingly with the increase in power density. The study of the gas volume fraction indicated that although the radiolytic gas bubble size does not increase significantly with increasing power, the number of bubbles and gas produced increases appreciably. All of these results were consistent with those reported by other authors in the literature.

Online publication date: Mon, 05-Jul-2021

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Nuclear Energy Science and Technology (IJNEST):
Login with your Inderscience username and password:

    Username:        Password:         

Forgotten your password?


Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com