Nitric oxide yield from combustion of a low calorific gasification product gas: numerical and experimental study Online publication date: Fri, 09-Jun-2006
by Anders Brink, Mikko Hupa, Esa Kurkela, Marjut Suomalainen
Progress in Computational Fluid Dynamics, An International Journal (PCFD), Vol. 6, No. 4/5, 2006
Abstract: The nitrogen oxide yield in a combustor burning an ammonia rich product gas from a bubbling bed gasifier has been investigated. The measurements showed a surprisingly small effect of the excess air in the combustor on the NOx emissions. To understand the reason for this behaviour the nitrogen chemistry in the combustor has been studied using CFD combined with a detailed description of the fuel-N chemistry. With higher oxygen excess a NOx yield of 22% is calculated compared to a measured NOx yield of 21%. In the case with lower oxygen excess the corresponding numbers are 20% and 18%, respectively.
Online publication date: Fri, 09-Jun-2006
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the Progress in Computational Fluid Dynamics, An International Journal (PCFD):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email email@example.com