Title: Preparation of TiO2 film on Ag and Al electrode for electrochemical bio-sensing application
Authors: Nibedita Patro; Priyabrata Pattanaik; Sushanta Kumar Kamilla
Addresses: Department of Electronics and Instrumentation Engineering, Faculty of Engineering and Technology (ITER), Siksha 'O' Anusandhan (Deemed to be University), Jagamohan Nagar, Khandagiri, Bhubaneswar, 751030, Odisha, India ' Department of Electronics and Communication Engineering, Faculty of Engineering and Technology (ITER), Siksha 'O' Anusandhan (Deemed to be University), Jagamohan Nagar, Khandagiri, Bhubaneswar-751030, Odisha, India ' Department of Physics, Faculty of Engineering and Technology (ITER), Siksha 'O' Anusandhan (Deemed to be University), Jagamohan Nagar, Khandagiri, Bhubaneswar, 751030, Odisha, India
Abstract: In this present, work, titanium dioxide (TiO2) deposited on Ag and Al electrodes were fabricated by sol-gel chemical wet and dry (CWD) method to detect urea. The formation of the polycrystalline TiO2 deposited on Ag and Al substrates were confirmed by X-ray diffraction (XRD) analysis. The XRD analyses of both the samples clearly indicated that some percentage of Ag and Al diffuses into the TiO2 matrix at its interface region. The nature of I-V characteristics showed by the TiO2 on Ag and Al wire electrodes are found to be Ohmic and is perfect to be used for electrochemical sensor or bio-sensor at very low potential value. The performance and response to various concentrations of urea solution and pH level were experimentally studied by using TiO2 coated on Ag and Al as working electrodes with respect to Ag as reference electrode.
Keywords: titanium dioxide; TiO2; chemical wet and dry; CWD; X-ray diffraction analysis; XRD; ammonia sensor.
DOI: 10.1504/IJNBM.2018.094908
International Journal of Nano and Biomaterials, 2018 Vol.7 No.4, pp.311 - 320
Received: 09 May 2017
Accepted: 05 Feb 2018
Published online: 26 Sep 2018 *