Title: The applicability of welding force for spot weld quality assurance

Authors: Samo Simončič; Primož Podržaj

Addresses: Faculty of Mechanical Engineering, University of Ljubljana, Aškerčeva 6, Ljubljana 1000, Slovenia ' Faculty of Mechanical Engineering, University of Ljubljana, Aškerčeva 6, Ljubljana 1000, Slovenia

Abstract: This paper presents research about the possible usage of welding force for the estimation of the weld strength. Other signals such as welding current or electrode displacement are commonly used for this purpose. Our previous research has, however, shown that welding force is a very good indicator of expulsion occurrence. In this paper, we presented the relationship between time needed for expulsion occurrence and weld strength. The results are better than in the case of welding current. In order not to limit this approach only to welds with expulsion, another variable is calculated from the welding force signal. The welding force variation is the sum of square differences of welding force and mean welding force. Although slightly less accurate than time needed for expulsion variable, it is not limited to expulsion welds.

Keywords: RSW; resistance spot welding; welding force; weld strength; weld quality assurance; QA.

DOI: 10.1504/IJMMP.2014.066921

International Journal of Microstructure and Materials Properties, 2014 Vol.9 No.3/4/5, pp.422 - 432

Published online: 16 Jan 2015 *

Full-text access for editors Full-text access for subscribers Purchase this article Comment on this article