Title: Investigations on wear and frictional properties of kenaf fibre polyurethane composites under dry and wet contact conditions

Authors: Narish Singh; B.F. Yousif; Dirk Rilling

Addresses: Faculty of Engineering and Technology, Multimedia University, Jalan Ayer Keroh lama, 75450, Melaka, Malaysia. ' Faculty of Engineering and Surveying, University of Southern Queensland, Toowoomba, QLD 4350, Australia. ' Faculty of Engineering and Technology, Multimedia University, Jalan Ayer Keroh lama, 75450, Melaka, Malaysia

Abstract: In this paper, an investigation was conducted to understand the wear and frictional properties of kenaf fibre reinforced polyurethane composites. The effect of applied loads (30 to 80 N), sliding distance (up to 2.7 km), and fibre orientation [i.e., parallel (P-O), anti-parallel (AP-O) and normal (N-O)] were determined under dry and wet contact sliding. Specific wear rates for all fibre orientations improved under wet contact except parallel orientated composites. Presence of water in wet sliding has significantly reduced the friction coefficient compared to dry sliding besides acting as a cooling agent. A scanning electron microscope (SEM) was used to study the worn surfaces and wear mechanism encountered. The predominant wear mechanism observed under dry sliding was micro-cracks, plastic deformation and thermo-mechanical deformation. Meanwhile, the worn surfaces under wet contact are very minimal, namely micro-ploughing at elevated sliding distances.

Keywords: adhesive wear; kenaf fibre; polyurethane composites; wet contact; dry contact; water lubrication; friction.

DOI: 10.1504/IJPTECH.2011.044904

International Journal of Precision Technology, 2011 Vol.2 No.4, pp.375 - 387

Published online: 15 Jan 2012 *

Full-text access for editors Full-text access for subscribers Purchase this article Comment on this article