Title: 3D distribution of envelope trace heights related to ground surface smoothness in CNC grinding of free-form surface

Authors: J. Xie, R.M. Zhou, Y.G. Zhong

Addresses: School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China. ' School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China. ' School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China

Abstract: The dispersed calculation of envelope trace heights was proposed in CNC grinding of free-form surface. The aim is to understand how 3D distribution of envelope trace heights affects ground surface smoothness. First, the 3D tool path surface was constructed to plan 3D tool paths, and then the dispersed envelope trace heights were calculated using the interference section between adjacent wheel profiles. Finally, a CNC grinding experiment was carried out to investigate the relation between envelope trace height distribution and ground surface smoothness. The results show that the dispersed calculation of envelope trace height can be used to display its distribution on 3D ground curve surface. It is confirmed that the envelope trace height depends on the slope of ground curve surface. The smooth curve surface can be gradually generated when the envelope trace height is less than 2 μm.

Keywords: CNC grinding; arc-shaped grinding wheels; 3D tool paths; envelope trace height; CNC machining; freeform surfaces; surface roughness; surface quality.

DOI: 10.1504/IJMMM.2010.036147

International Journal of Machining and Machinability of Materials, 2010 Vol.8 No.3/4, pp.408 - 416

Published online: 22 Oct 2010 *

Full-text access for editors Full-text access for subscribers Purchase this article Comment on this article