Title: Thermal analysis of orthogonal cutting of cortical bone using finite element simulations

Authors: K. Alam, A.V. Mitrofanov, V.V. Silberschmidt

Addresses: Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University, Loughborough, Leicestershire, LE11 3TU, UK. ' Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University, Loughborough, Leicestershire, LE11 3TU, UK. ' Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University, Loughborough, Leicestershire, LE11 3TU, UK

Abstract: Bone cutting is widely used in orthopaedic, dental and neuro surgeries and is a technically demanding surgical procedure. One of the major concerns in current research is thermal damage of the bone tissue caused by high-speed power tools, which occurs when temperature rises above a certain threshold value for the tissue known as bone necrosis. Hence, optimisation of cutting parameters is necessary to avoid thermal necrosis and improve current orthopaedic surgical procedures. In this study a thermo-mechanical finite element model of bone cutting is presented that idealises cortical bone as an equivalent homogeneous isotropic material. The maximum temperature in the bone was found in the region where the thin bone layer (chip) was separated from the bone sample that was adjacent to the tool rake (i.e., front face of the tool). Temperature values were calculated with the model and compared for cutting conditions with and without a coolant (irrigation). The influence of bone|s thermal properties on the depth of thermal necrosis is discussed. The simulated cutting temperatures were compared with experimental results obtained in bone drilling tests. Simulations of the cutting processes identified critical variables and cutting parameters affecting thermo-mechanics of bone cutting.

Keywords: bone cutting; finite element method; FEM; modelling; cutting temperatures; bone drilling; orthopaedic surgery; irrigation; thermal necrosis; bone properties; biomechanics; thermocouple; thermal damage; cutting parameters; optimisation; cortical bone.

DOI: 10.1504/IJECB.2010.035259

International Journal of Experimental and Computational Biomechanics, 2010 Vol.1 No.3, pp.236 - 251

Published online: 18 Sep 2010 *

Full-text access for editors Full-text access for subscribers Purchase this article Comment on this article