Title: An efficient method for calculating the nonlinear stiffness of progressive multi-leaf springs

Authors: Sungsoo Kim, Wonkyu Moon, Youngil Yoo

Addresses: Dept. of Mech. Eng., Pohang University of Science and Technology (Postech), San 31, Namgu, Pohang, Kyungbuk 790-784 South Korea. Dept. of Mech. Eng., Pohang University of Science and Technology (Postech), San 31, Namgu, Pohang, Kyungbuk 790-784 South Korea. Ulsan R&D Centre, Hyundai Motor Company, South Korea.

Abstract: An efficient method for calculating the nonlinear stiffness of a progressive multi-leaf spring is developed and evaluated. This method utilises the interaction between the main and help springs that induces the nonlinearity. The main and the help springs are modelled as multi-leaf cantilever beams, and are then integrated as one by connecting the models for each side of the progressive multi-leaf spring at the centre-bolt. The results from the developed model are evaluated by comparison with those from the commercial FEA programme, ABAQUS. The nonlinear spring coefficients calculated by FEM analysis are very close to those calculated using the developed method. From the comparative evaluations, the developed method is shown to quickly evaluate the nonlinear spring behaviour of progressive multi-leaf springs with acceptable accuracy. Finally, comparison of the model results with those from an experiment measuring the stiffness of a progressive multi-leaf spring show that the model captures the mechanical characteristics of the spring to an accuracy acceptable for design use.

Keywords: cantilever beams; Euler beam theory; nonlinear characteristics; progressive multi-leaf spring; stiffness.

DOI: 10.1504/IJVD.2002.002021

International Journal of Vehicle Design, 2002 Vol.29 No.4, pp.403-422

Published online: 15 Aug 2003 *

Full-text access for editors Full-text access for subscribers Purchase this article Comment on this article