Title: Toughness and microstructure stability in hot-working tool steels subjected to washout in molten aluminium

Authors: R. Perrone, D. Ugues, E. Torres, U. Regina, M. Rosso

Addresses: COGNE ACCIAI SPECIALI spa, Str. Paravera, 16, 11100 Aosta, Italy. ' Dipartimento di Scienza dei Materiali e Ingegneria Chimica, Politecnico di Torino, Cso Duca degli Abruzzi, 24, I 10129 Torino, Italy. ' Dipartimento di Scienza dei Materiali e Ingegneria Chimica, Politecnico di Torino, Cso Duca degli Abruzzi, 24, I 10129 Torino, Italy. ' COGNE ACCIAI SPECIALI spa, Str. Paravera, 16, 11100 Aosta, Italy. ' Dipartimento di Scienza dei Materiali e Ingegneria Chimica, Politecnico di Torino, Cso Duca degli Abruzzi, 24, I 10129 Torino, Italy

Abstract: A basic and a modified AISI H11 steels were selected for the research. Impact toughness and microstructure in the quenched and tempered state were analysed. Cyclic immersions in molten aluminium with the aim of simulating the washout, typical of aluminium die casting tools, were applied. Optical and electronic microscopy analysis were used to evaluate damages provided by washout on the specimen surface. XRD measurements were applied to identify the corrosion and soldering products deposited on the steel surface. Microhardness profiles were recorded before and after the test to assess any softening effect. Impact tests were performed on specimens subjected to increasing immersion cycles. A detailed study of the evolution of damages provided by cyclic contact with molten aluminium is presented for two hot working tool steels. An analysis of the modulation of the impact toughness as a function of the number of immersions in molten aluminium is reported.

Keywords: toughness modulation; AISI H11; modified AISI H11; thermal fatigue; immersion; molten aluminium alloys; die casting; hot-working tool steel; microstructure; impact toughness; corrosion; soldering; microhardness.

DOI: 10.1504/IJMMP.2008.018730

International Journal of Microstructure and Materials Properties, 2008 Vol.3 No.2/3, pp.231 - 240

Published online: 16 Jun 2008 *

Full-text access for editors Full-text access for subscribers Purchase this article Comment on this article