Title: Assessment of horizontal pillar burst in deep hard rock mines

Authors: Hani S. Mitri

Addresses: Department of Mining and Materials Engineering, McGill University, Montreal, Quebec, H3A 2A7 Canada

Abstract: The paper examines three methods for assessing the stability of horizontal pillars in deep underground hard rock mines. Such pillars could suffer from strain-type rockburst when they become too thin in an environment characterized by high in situ stress and hard, brittle rock. The methods presented are: potential stress failure (PSF), energy release rate (ERR) and the Burst Potential Index (BPI). It is shown through a numerical model of a characteristic crown pillar problem that the BPI is the most suitable of the three. Contrary to the PSF method, the BPI method accounts for the rock mass strength and deformability.

Keywords: rockburst; potential stress failure; energy release rate; burst potential index; rock failure; cut and fill mining; pillar failure; finite element method; FEM; mining induced energy; stability; horizontal pillars; risk assessment; minerals industry; rock mass strength; deformability.

DOI: 10.1504/IJRAM.2007.014094

International Journal of Risk Assessment and Management, 2007 Vol.7 No.5, pp.695 - 707

Published online: 18 Jun 2007 *

Full-text access for editors Full-text access for subscribers Purchase this article Comment on this article