Title: Similar material development of seafloor polymetallic sulphide
Authors: Ya Xie; Zhonghua Huang; Yingguang Xu
Addresses: School of Mechanical Engineering, Hunan Institute of Engineering, Xiangtan 411104, China ' School of Mechanical Engineering, Hunan Institute of Engineering, Xiangtan 411104, China ' School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China
Abstract: This paper focuses on the similar materials development of the seafloor polymetallic sulphide. Uniaxial compression tests and triaxial compression tests were conducted on the seafloor polymetallic sulphide samples to obtain the uniaxial compressive strength, the cohesion and other mechanical parameters. Based on the similar materials model method and similarity conditions, similar materials for seafloor polymetallic sulphide were selected and the composition proportion was determined. The similar materials mainly composed of sand, gypsum and cement. The similar materials were developed and the mechanical properties were tested. Test results show that the cohesion and the internal friction angle which were close to those of the seafloor polymetallic sulphide were 2.447 MPa 38.04°, respectively. The test results show that the similar materials can be used to research the cutting performance of seafloor polymetallic sulphide.
Keywords: seafloor polymetallic sulphide; similar materials; deepsea mining.
DOI: 10.1504/IJMPT.2020.110111
International Journal of Materials and Product Technology, 2020 Vol.60 No.2/3/4, pp.126 - 137
Received: 26 Nov 2019
Accepted: 24 Apr 2020
Published online: 06 Oct 2020 *