Title: Application of the PDCA cycle to reduce waste in the metallurgical industry

Authors: E. Natt; M.R. Policena; E.S. Passari

Addresses: Department of Mechanical Engineering, Federal Institute Sul-rio-grandense, Passo Fundo-RS, Brazil ' Department of Mechanical Engineering, Federal Institute Sul-rio-grandense, Passo Fundo-RS, Brazil ' Department of Mechanical Engineering, Federal Institute Rio Grande do Sul, Ibirubá-RS, Brazil

Abstract: This study analysed improvements in a metal structure manufacturing company, aiming to optimise the use of steel sheets through cutting plans. The acquisition costs of the most used sheets were recorded and the scrap marketing processes were analysed. Based on this data, the average sale price of scrap was calculated at US$0.53 per kilogram. Additionally, an improvement plan based on the PDCA cycle was developed to ensure full utilisation of steel sheets. The analysis considered a sample of 100 cutting plans over a six-month period. Using custom-sized sheets could result in a semi-annual savings of approximately US$81,500. The use of custom-sized sheets allowed a reduction from 388 tons to 347 tons in the period, which reduces the CO2 emissions inherent in the transportation of sheets. The findings contribute to the operational efficiency of the company and the reduction of waste, improving the carbon footprint in metal processing.

Keywords: metallurgical industry; cutting plans; metallic structures; PDCA cycle; waste reduction.

DOI: 10.1504/IJEE.2025.146564

International Journal of Environmental Engineering, 2025 Vol.13 No.2, pp.157 - 173

Received: 20 Dec 2024
Accepted: 21 Mar 2025

Published online: 04 Jun 2025 *

Full-text access for editors Full-text access for subscribers Purchase this article Comment on this article