Int. J. of Vehicle Safety   »   2011 Vol.5, No.3

 

 

Title: Real-time data acquisition system for vehicle ABS test stand

 

Authors: Wang Xu-dong; Liu Jian; Zhou Kai

 

Addresses:
Engineering Research Center of Automotive Electronics, Harbin University of Science and Technology, Mailbox 179, No. 52, Xuefu Road, Harbin, Heilongjiang, China.
Engineering Research Center of Automotive Electronics, Harbin University of Science and Technology, Mailbox 179, No. 52, Xuefu Road, Harbin, Heilongjiang, China
Engineering Research Center of Automotive Electronics, Harbin University of Science and Technology, Mailbox 179, No. 52, Xuefu Road, Harbin, Heilongjiang, China.

 

Abstract: Anti-lock Braking System (ABS) has widespread use depending on its mature technology and superior performance. We design a test rig by an intensive study on the principle and testing techniques of ABS. It can simulate the running condition of wheels for ABS to test the braking performance. Measure and control system based on the CAN-BUS and the powerful LabVIEW software was adopted in this study for data acquisition and communication. The parameters of the test rig are set on the interface, and the data transmitted by the test rig is recorded and analysed simultaneously by applying it.

 

Keywords: real-time data acquisition; test stand; LabVIEW; CAN-BUS; user interface; vehicle safety; anti-lock braking systems; ABS; vehicle braking; braking performance.

 

DOI: 10.1504/IJVS.2011.042853

 

Int. J. of Vehicle Safety, 2011 Vol.5, No.3, pp.271 - 285

 

Submission date: 29 Oct 2010
Date of acceptance: 13 May 2011
Available online: 07 Oct 2011

 

 

Editors Full text accessPurchase this articleComment on this article