Hole quality and cutting time evaluation in the interpolated helical milling
by Dalberto Dias Da Costa; Alessandro Marques; Fred Lacerda Amorim
International Journal of Manufacturing Research (IJMR), Vol. 10, No. 4, 2015

Abstract: The interpolated helical milling (IHM) is considered a very flexible strategy which allows milling, instead of drilling, holes with more generic tools. However, despite of its dissemination in industry, it is currently known that few research works have been carried out about the influence of cutting condition on the quality of holes and their cutting time. In this study, the production of holes was investigated using the IHM technique for rough and finish machining conditions, and the process performance was evaluated by the cutting time, and the holes surface roughness and roundness. Fifty four holes were milled in AISI 1045 steel bars with end mill cutters in a vertical machining centre; following Taguchi (L9) experiments where the cutting speed, circular feed per tooth and axial feed per tooth were analysed for rough operations, and for the finish operations, the radial depth of cut was also investigated. From the results, it can be concluded that high quality surface can be achieved at the rough phase. In this case, the combination of lower axial feed rates (ƒ_z) and higher cutting speed (V_c) should be selected to guarantee a higher hole quality, without compromising the productivity. [Received 13 April 2015; Revised 06 August 2015; Accepted 06 September 2015]

Online publication date: Sat, 20-Feb-2016

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Manufacturing Research (IJMR):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com