Terrestrial testbed for remote Coulomb spacecraft rotation control Online publication date: Tue, 13-May-2014
by Daan Stevenson; Hanspeter Schaub
International Journal of Space Science and Engineering (IJSPACESE), Vol. 2, No. 1, 2014
Abstract: A terrestrial testbed designed to investigate the torques between non-symmetric charged bodies is introduced. In practice, these torques may be used by spacecraft for touchless remote attitude control. The experimental system consists of a charged cylinder that rotates about its minor axis on a low friction bearing, while the electric potential on a nearby sphere is actively controlled to increase or decrease the rotation rate of the cylinder. A numerical simulation of the system that uses a previously developed reduced order electrostatic model is found to match the experimental data extremely well. Time dependent charge drain and disturbance torques on the cylinder are characterised so that they may be accurately modelled in the simulation. At low speeds, the achievable Coulomb torques are several times higher than the atmospheric drag and bearing friction. An active charge control de-spin manoeuvre arrests the cylinder motion in about 1/3 of the time it takes the cylinder to come to rest due to the friction in the system alone. Several hardware components and methods are identified for improvement in future iterations of the testbed, but the current result constitutes a successful verification of the Coulomb spacecraft de-spin concept.
Online publication date: Tue, 13-May-2014
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Space Science and Engineering (IJSPACESE):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email email@example.com