Development of a packed-bed reactor for the recovery of metals from industrial wastewaters
by E.O. Obanijesu, O.O. Bello, F.A.O. Osinowo, S.R.A. Macaulay
International Journal of Environment and Pollution (IJEP), Vol. 22, No. 6, 2004

Abstract: Affinity separation is becoming well established for the purification and recovery of metals from industrial wastewaters. Although the method has been successfully applied on a bench-scale, there is a need for reaction engineering studies to scale-up the process for use in large-scale wastewater purification and recovery of valuable metals. In this study, a pilot-scale packed-bed reactor has been developed in order to investigate influences of process parameters and their interactions on the recovery of metals from process wastewaters using diatomaceous material. The material was formed into a packed configuration to provide a high adsorbent area-to-aqueous solution volume ratio. Activated carbon and ion-exchange resin were tested for comparison. The results obtained show that the flow-rate, residence time, metal concentration loading and packed-bed geometry significantly influenced the efficiency of the reactor system metal recovery and have to be considered in the design of large-scale system. An optimum residence time of 2 h was found to give metal recovery capacities of 60%, 76% and 80% for the ion-exchange resin, diatomaceous material and activated carbon, respectively, which confirmed the bench-scale studies. The sequestered metals were efficiently eluted from the diatomaceous material using different elution solutions for different metals. The selectivity of the adsorbent for specific metals can be manipulated on the uptake and elution sides of the process. The study also revealed that diatomaceous material can be regenerated and used many times over, just like conventional adsorbents or ion-exchange resins in process wastewater purification as well as in metal recovery processes. The application of the packed-bed reactor using the locally available diatomaceous material is therefore recommended for economical and cost-effective small-scale purification and recovery of metals from industrial wastewaters loaded with metals in Nigeria.

Online publication date: Thu, 27-Jan-2005

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Environment and Pollution (IJEP):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com