Title: Modelling of bore honing

Authors: Sergey A. Voronov, Alexander M. Gouskov, Oleg A. Bobrenkov

Addresses: Applied Mechanics Department, Bauman Moscow State Technical University, Moscow 105005, Russia. ' Applied Mechanics Department, Bauman Moscow State Technical University, Moscow 105005, Russia. ' Department of Mechanical and Aerospace Engineering, New Mexico State University, Las Cruces, NM 88003-8001, USA

Abstract: This paper discusses the modelling of deep holes honing. The dynamic model of honing, including the models of tool dynamics, cutting forces calculation, and new surface formation, are presented. The tool frequency characteristics, method of numeric calculation of machined surface and integral criteria of the surface distortion from an ideal cylinder are analysed based on the designed model.

Keywords: bore honing; dynamic modelling; vibration; machined surfaces; surface distortion; deep holes; tool dynamics; cutting forces; surface formation.

DOI: 10.1504/IJMMS.2009.028081

International Journal of Mechatronics and Manufacturing Systems, 2009 Vol.2 No.5/6, pp.566 - 579

Published online: 03 Sep 2009 *

Full-text access for editors Full-text access for subscribers Purchase this article Comment on this article