Prediction of surface roughness during wire electrical discharge machining of SiCp/6061 Al metal matrix composite Online publication date: Sat, 20-Dec-2014
by Pragya Shandilya; P.K. Jain; N.K. Jain
International Journal of Industrial and Systems Engineering (IJISE), Vol. 12, No. 3, 2012
Abstract: In this work, response surface methodology (RSM) and artificial neural network (ANN) techniques were used for predicting the surface roughness during wire electrical discharge machining (WEDM) of SiCp/6061 Al metal matrix composite. Box–Behnken design approach has been used and totally 29 experiments were carried out using four process input variables, i.e. servo voltage, pulse-on time, pulse-off time and wire feed rate. The mathematical relationship between WEDM input process parameters and surface roughness was established to determine the value of surface roughness mathematically. The RSM predicted values and ANN predicted values of surface roughness were compared with the experimental values and their closeness with the experimental values was determined. Good agreement was observed between the predicted model results and experimental results. Finally, the ANN model and RSM model for surface roughness were compared with each other.
Online publication date: Sat, 20-Dec-2014
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Industrial and Systems Engineering (IJISE):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email email@example.com