An accurate model of a highly ordered 81/19 Permalloy AMR Wheatstone bridge sensor against a 48 pole pair ring-magnet Online publication date: Fri, 22-Jun-2007
by Michael J. Haji-Sheikh, Young Yoo
International Journal of Intelligent Systems Technologies and Applications (IJISTA), Vol. 3, No. 1/2, 2007
Abstract: Presented is a method to model a magnetoresistive Wheatstone bridge using a new magnetoresistive model for resistor elements in saturation. The model works well with highly ordered thin films such as Permalloy. This new model accurately predicts the behaviour of individual magnetoresistors and follows the form ΔR/R0 = A + B((1 + C × cos(2θ)²) + C × sin(2θ)²)1/2. To demonstrate the use of this model, a 17.5 nm thick Permalloy sensor bridge was used to sense a 48 pole pair ring-magnet. The results show a good correlation between the model and an actual device under test.
Online publication date: Fri, 22-Jun-2007
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Intelligent Systems Technologies and Applications (IJISTA):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email email@example.com