On the role of magnetising frequency and magnetic field intensity on hysteresis loop characteristics Online publication date: Wed, 25-Oct-2017
by Ashish Srivastava; Harikishor Kumar; Mohd. Zaheer Khan Yusufzai; Meghanshu Vashista
International Journal of Microstructure and Materials Properties (IJMMP), Vol. 12, No. 1/2, 2017
Abstract: The goal of present research work is to study the variation in the shape of hysteresis loop owing to change in the analysis parameter i.e., magnetising frequency and applied magnetic field strength upon pack carburised low carbon steel samples. Pack carburised heat treatment performed at three different temperatures to induce varying hardness into steel samples. Hysteresis loop characteristics such as coercivity, permeability, power loss and remanence were measured in a wide range of magnetising frequency and magnetic field intensity. Coercivity is observed to increase with increase in magnetising frequency and applied field strength. In low-frequency range (<1 Hz), remanence and power loss were found to decrease, with an increase in frequency, in a contrary, increase in frequency in high-frequency range (>1 Hz) results into increase in remanence and power loss. However, with an increase in magnetic field strength both remanence and power loss were found to increase.
Online publication date: Wed, 25-Oct-2017
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Microstructure and Materials Properties (IJMMP):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email email@example.com