Deformation behaviour of high strength steel sheet 22MnB5 at elevated temperature and its FE simulation model verification Online publication date: Wed, 30-Nov-2016
by Bingtao Tang; Wei Zheng; Lili Huang
International Journal of Materials and Product Technology (IJMPT), Vol. 54, No. 1/2/3, 2017
Abstract: The hot ductility and fracture behaviour of boron steel 22MnB5 is of significant importance in the development of new components based on the hot stamping process. It is well known that the strain rate and temperature have remarkable influence on the ductility and fracture behaviour of boron steel 22MnB5. In the paper, the uniaxial tensile tests were carried out at elevated temperatures, in a range between 550°C and 850°C, at different strain rates, to investigate the hot ductility of boron steel at high temperature. In order to discover the fracture mechanisms under hot tensile testing, fracture surface observations were performed by scanning electron microscope (SEM). Finite element (FE) model of the experiments was developed and successfully validated against the experimental results. The predicted force-displacement curves indicate the proposed FE model is able to predict the ductile fracture onset in hot stamping.
Online publication date: Wed, 30-Nov-2016
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Materials and Product Technology (IJMPT):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email email@example.com