Investigation of piston slap induced vibration of IC engine considering the coupled vibration of connecting rod, crankshaft and engine block Online publication date: Wed, 19-Feb-2014
by Guangze Zheng; Kazuhide Ohta
International Journal of Powertrains (IJPT), Vol. 3, No. 1, 2014
Abstract: Piston slap is a major cause of the complex transient vibration response related to the impact excitation inside the engine. In the conventional analytical model of piston slap, the coupled vibration of piston and cylinder liner was taken into consideration only. In order to estimate the piston slap induced vibration of IC engine accurately, a theoretical model of piston slap which considering the movement and coupled vibration of piston, connecting rod, crankshaft and engine block was proposed. Based on this model, the piston slap and vibration response of some type of 3.5 L diesel engine were predicted. Then the comparison of rotate angle of piston, impact force induced by piston slap, torsional vibration of crankshaft, reaction force acting on main bearing and the vibration response of engine block between the present method and conventional method have been discussed in details. Research results revealed that the coupled vibration takes seriously influence on piston slap and the piston slap also influences the characteristic of crankshaft torsional vibration, reaction force at main bearing and vibration response of engine block inverse.
Online publication date: Wed, 19-Feb-2014
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Powertrains (IJPT):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email email@example.com