Effect of anaerobic threadlockers on the fatigue strength of threaded connections Online publication date: Mon, 01-Nov-2010
by Eugenio Dragoni
International Journal of Materials and Product Technology (IJMPT), Vol. 14, No. 5/6, 1999
Abstract: The paper deals with the fatigue behaviour of threaded connections bonded with anaerobic threadlockers. Fatigue tests are described involving rolled M10 bolts of property class 10.9 loaded under constant amplitude at the load levels 11±10 kN and 8.8±8 kN. The number of cycles to failure consequent to treatment is significantly longer than without treatment, the ratio between the corresponding lives being about 3.5 at the higher load (11±10 kN) and about 2 at the lower load (8.8±8 kN). The reduced effect with the lower load discloses a common endurance limit. The behaviour is attributed to elimination of fretting damage by the contacting threads of the bonded connections. This interpretation suggests an important role of the mean test load and fosters further investigation.
Online publication date: Mon, 01-Nov-2010
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Materials and Product Technology (IJMPT):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email firstname.lastname@example.org