2026 Vol.70 No.6 Open Access2026 Vol.70 No.5 Open Access2026 Vol.70 No.32025 Vol.70 No.22025 Vol.70 No.12024 Vol.69 No.3/42024 Vol.69 No.1/22024 Vol.68 No.3/42024 Vol.68 No.1/2 Free Access2023 Vol.67 No.3/42023 Vol.67 No.22023 Vol.67 No.12023 Vol.66 No.3/42023 Vol.66 No.22023 Vol.66 No.12022 Vol.65 No.42022 Vol.65 No.32022 Vol.65 No.22022 Vol.65 No.12022 Vol.64 No.3/42022 Vol.64 No.22022 Vol.64 No.12021 Vol.63 No.42021 Vol.63 No.32021 Vol.63 No.1/22021 Vol.62 No.42021 Vol.62 No.1/2/32020 Vol.61 No.2/3/42020 Vol.61 No.12020 Vol.60 No.2/3/42020 Vol.60 No.12019 Vol.59 No.42019 Vol.59 No.32019 Vol.59 No.22019 Vol.59 No.12019 Vol.58 No.42019 Vol.58 No.2/32019 Vol.58 No.12018 Vol.57 No.42018 Vol.57 No.1/2/32018 Vol.56 No.42018 Vol.56 No.32018 Vol.56 No.1/22017 Vol.55 No.42017 Vol.55 No.1/2/32017 Vol.54 No.42017 Vol.54 No.1/2/32016 Vol.53 No.3/42016 Vol.53 No.22016 Vol.53 No.12016 Vol.52 No.3/42016 Vol.52 No.1/22015 Vol.51 No.42015 Vol.51 No.32015 Vol.51 No.22015 Vol.51 No.12015 Vol.50 No.3/42015 Vol.50 No.22015 Vol.50 No.12014 Vol.49 No.42014 Vol.49 No.2/32014 Vol.49 No.12014 Vol.48 No.1/2/3/42013 Vol.47 No.1/2/3/42013 Vol.46 No.42013 Vol.46 No.2/32013 Vol.46 No.12012 Vol.45 No.1/2/3/42012 Vol.44 No.3/42012 Vol.44 No.1/22012 Vol.43 No.1/2/3/42011 Vol.42 No.3/42011 Vol.42 No.1/22011 Vol.41 No.1/2/3/42011 Vol.40 No.3/42011 Vol.40 No.1/22010 Vol.39 No.3/42010 Vol.39 No.1/22010 Vol.38 No.42010 Vol.38 No.2/32010 Vol.38 No.12010 Vol.37 No.3/42010 Vol.37 No.1/22009 Vol.36 No.1/2/3/42009 Vol.35 No.3/42009 Vol.35 No.1/22009 Vol.34 No.42009 Vol.34 No.32009 Vol.34 No.1/22008 Vol.33 No.42008 Vol.33 No.32008 Vol.33 No.1/22008 Vol.32 No.42008 Vol.32 No.2/32008 Vol.32 No.12008 Vol.31 No.2/3/42008 Vol.31 No.12007 Vol.30 No.42007 Vol.30 No.1/2/32007 Vol.29 No.1/2/3/42007 Vol.28 No.3/42007 Vol.28 No.1/22006 Vol.27 No.3/42006 Vol.27 No.1/22006 Vol.26 No.3/42006 Vol.26 No.1/22006 Vol.25 No.42006 Vol.25 No.1/2/32005 Vol.24 No.1/2/3/42005 Vol.23 No.3/42005 Vol.23 No.1/22005 Vol.22 No.42005 Vol.22 No.1/2/32004 Vol.21 No.62004 Vol.21 No.52004 Vol.21 No.42004 Vol.21 No.1/2/32004 Vol.20 No.5/62004 Vol.20 No.42004 Vol.20 No.1/2/32003 Vol.19 No.62003 Vol.19 No.52003 Vol.19 No.3/42003 Vol.19 No.1/22003 Vol.18 No.4/5/62003 Vol.18 No.1/2/32002 Vol.17 No.82002 Vol.17 No.72002 Vol.17 No.5/62002 Vol.17 No.3/42002 Vol.17 No.1/22001 Vol.16 No.82001 Vol.16 No.6/72001 Vol.16 No.4/52001 Vol.16 No.1/2/32000 Vol.15 No.62000 Vol.15 No.3/4/52000 Vol.15 No.1/21999 Vol.14 No.5/61999 Vol.14 No.2/3/41999 Vol.14 No.11998 Vol.13 No.3/4/5/61998 Vol.13 No.1/21997 Vol.12 No.4/5/61997 Vol.12 No.2/31997 Vol.12 No.11996 Vol.11 No.5/61996 Vol.11 No.3/41996 Vol.11 No.1/21995 Vol.10 No.3/4/5/61995 Vol.10 No.1/21994 Vol.9 No.4/5/61994 Vol.9 No.1/2/31993 Vol.8 No.2/3/41993 Vol.8 No.11992 Vol.7 No.41992 Vol.7 No.31992 Vol.7 No.21992 Vol.7 No.11991 Vol.6 No.41991 Vol.6 No.31991 Vol.6 No.21991 Vol.6 No.11990 Vol.5 No.41990 Vol.5 No.31990 Vol.5 No.21990 Vol.5 No.11989 Vol.4 No.41989 Vol.4 No.31989 Vol.4 No.21989 Vol.4 No.11988 Vol.3 No.3/41988 Vol.3 No.21988 Vol.3 No.11987 Vol.2 No.3/41987 Vol.2 No.21987 Vol.2 No.11986 Vol.1 No.1

International Journal of Materials and Product Technology (IJMPT)

International Journal of Materials and Product Technology

2016 Vol.53 No.1


Pages Title and author(s)
1-14Dynamic simulation of chip formation in the process of cutting
Jüri Olt; Alexander Liyvapuu; Marten Madissoo; Viacheslav Maksarov
DOI: 10.1504/IJMPT.2016.076363
15-27Degradation behaviour and microstructural characterisation of HVOF-sprayed Cr3C2-NiCr cermet coatings in molten salt environment
V.N. Shukla; R. Jayaganthan; V.K. Tewari
DOI: 10.1504/IJMPT.2016.076364
28-41Prediction of the effectiveness of the feeding system of carbon steel sand castings using the solid fraction criterion. Application to square bars
Valentín Miguel-Eguía; María Carmen Manjabacas-Tendero; Nuria Medina-Ríos
DOI: 10.1504/IJMPT.2016.076370
42-60A study on the cutting errors of the tooth profiles of the cycloidal gears manufactured in CNC milling machine
Cihan Özel; Yunus Ortaç
DOI: 10.1504/IJMPT.2016.076373
61-70ANN-based prediction of ultimate strength of carbon/epoxy tensile specimen using acoustic emission RMS data
Kalidasan Krishnamoorthy; T. Sasikumar
DOI: 10.1504/IJMPT.2016.076374
71-85Numerical investigation of size effect on material behaviour in micro upsetting process
Wei Zheng; Bingtao Tang; Guangchun Wang
DOI: 10.1504/IJMPT.2016.076377
86-97Electrical discharge machining of Al (6351) alloy: role of electrode shape
S. Suresh Kumar; M. Uthayakumar; S. Thirumalai Kumaran; P. Parameswaran; E. Mohandas
DOI: 10.1504/IJMPT.2016.076378

 

Return to top