Study on the material removal mechanism of glass in single diamond grain grinding with ultrasonic vibration assisted Online publication date: Mon, 25-Feb-2019
by Jianyun Shen; Bin Dai; Xian Wu; Yuan Li; Zhongwei Hu
International Journal of Abrasive Technology (IJAT), Vol. 9, No. 1, 2019
Abstract: The ultrasonic vibration assisted grinding is widely used in machining of hard and brittle material. This paper presents a study on the material removal mechanism in ultrasonic vibration assisted grinding of glass. The single diamond grain grinding experiments were performed with and without ultrasonic vibration assisted. The grinding force and acoustic emission signal were measured and analysed, and the ground groove morphology was observed and analysed in detail. The following conclusions can be obtained: 1) the material removal mechanism is changed from continuous crack propagation in conventional grinding to micro crack breakage in ultrasonic vibration assisted grinding; 2) the addition of ultrasonic vibration in grinding of brittle material can reduce the crack propagation distance; 3) compared with the conventional grinding, the energy distribution of acoustic emission signal in ultrasonic vibration assisted grinding is more concentrated.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Abrasive Technology (IJAT):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com