Research on surface integrity in graphene nanofluid MQL milling of TC21 alloy Online publication date: Mon, 25-Feb-2019
by Ming Li; Tianbiao Yu; Hongyu Li; Lin Yang; Jiashun Shi; Wanshan Wang
International Journal of Abrasive Technology (IJAT), Vol. 9, No. 1, 2019
Abstract: As a new type of damage-tolerance titanium alloy, TC21 alloy is widely used in aerospace. However, TC21 is a difficult-to-machine material owing to its low thermal conductivity, high chemical activity and low elasticity modulus. In this work, minimum quantity lubrication (MQL) with graphene nanofluid was adopted in TC21 milling. In order to evaluate the effects of graphene nanoparticle on the surface integrity, a series of milling experiments were performed under the dry, gas, pure MQL and graphene nanofluid MQL condition respectively. Results showed that the graphene additive was effective for improving the surface integrity. Overall, the results could be explained that graphene additive could enhance the cooling and lubrication performances of the oil film formed in cutting zone. The findings of this work are expected to give a feasibility and some experimental basis for the application of the graphene additive in MQL milling.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Abrasive Technology (IJAT):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com
Our Blog 
Follow us on Twitter 
Visit us on Facebook