Research on ice fixed-abrasive polishing mechanism and technology for high-definition display panel glass
by Y.L. Sun; S.Y. Tang; W.Z. Lu; J. Li; D.W. Zuo
International Journal of Nanomanufacturing (IJNM), Vol. 14, No. 4, 2018

Abstract: This study introduces an ice fixed-abrasive polishing (IFAP) technology. Using silica solution IFAP pad and Al₂O₃ IFAP pad, orthogonal tests were performed on polishing high-definition display panel glass, respectively. The results show that the polishing efficiency and effect polished with silica solution IFAP pad are better than those polished with Al₂O₃ IFAP pad. The optimised silica solution IFAP parameters are: polishing pressure 0.1 MPa, polishing time 40 min, table velocity 80 r/min and the ratio of accelerator and slurry 1:10. Finally, the IFAP mechanism was studied and it is suggested that IFAP is a comprehensive effect of mechanical removal and microchemical reaction, combined with fixed abrasive polishing and free abrasive polishing.

Online publication date: Wed, 03-Oct-2018

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Nanomanufacturing (IJNM):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com