Chemical catalysts of Fenton reaction for single-crystal SiC based on nanoindentation
by Huazhuo Liang; Jiabin Lu; Qiusheng Yan; Tao Song
International Journal of Abrasive Technology (IJAT), Vol. 8, No. 3, 2018

Abstract: Aiming at production of single-crystal SiC for chemical mechanical polishing, Fenton reaction, and catalytic efficiency of FeSO4, Fe2(SO4)3, FeO, Fe3O4, and Fe2O3 were studied. The mechanical properties are obtained by nanoindentation experiments. Different catalysts can promote Fenton reaction, and all reaction layers formed with the same chemical composition, atomic structure, and hardness at 1.5 GPa. When Fe3O4 was used as catalyst in Fenton reaction, the effect was optimal because its hardness and modulus remained low. After 2 min, the thickness of reaction layer had reached 200 nm, which can fully meet requirements of CMP. Fenton reaction depends on ability of catalyst to ionise Fe2+. The higher concentration of Fe2+, the higher concentration of OH, and the faster reaction rate of SiC surface material.

Online publication date: Mon, 20-Aug-2018

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Abrasive Technology (IJAT):
Login with your Inderscience username and password:

    Username:        Password:         

Forgotten your password?


Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com