The properties and kinetics characteristics of oxidised ultra-heavy oil in the coke deposition process Online publication date: Fri, 19-Jan-2018
by Yi-Bo Li; Ya-Fei Chen; Wan-Fen Pu
International Journal of Oil, Gas and Coal Technology (IJOGCT), Vol. 17, No. 1, 2018
Abstract: High pressure air injection (HPAI) is generally considered an efficient method to drive crude oil. In this paper, the results showed that the oxidation of heavy oil was able to reduce the oxygen content. After the high pressure oxidation, the physical properties of crude oil changed, and it became inflammable. Due to the formation of coke, the viscosity increased sharply and the hydrogen/carbon (H/C) atomic ratio decreased. By using an environmental scanning electron microscope, it was observed that the structures of the original oil were reconstructed and the surface was covered by a large number of inflammable globular structure with a diameter of 500 nm that were believed to effectively reduce the flame point of the oxidised oil. Based on the kinetic analysis, under HTO conditions, deposited coke caused the reaction to be more exothermic, activating the subsequent deposition and forming a stable oxidation front. [Received: January 14, 2016; Accepted: September 18, 2016]
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Oil, Gas and Coal Technology (IJOGCT):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com
Our Blog 
Follow us on Twitter 
Visit us on Facebook