Investigation of the tribological behaviour of electrocodeposited Ni-MoS2 composite coatings Online publication date: Fri, 24-Nov-2017
by Ebru Saraloğlu Güler; Erkan Konca; İshak Karakaya
International Journal of Surface Science and Engineering (IJSURFSE), Vol. 11, No. 5, 2017
Abstract: Composite electroplating of solid lubricants in a metal matrix is an effective way to lower coefficient of friction (COF) and improve wear resistance of surfaces in sliding contact. In this work, Ni-MoS2 composite coatings were deposited on AISI 304 stainless steel substrates by electroplating from Watts bath containing suspended MoS2 particles and their tribological behaviour was studied. The effects of MoS2 particle concentration (5, 10 and 30 g/l), MoS2 particle size (1.440 and 5.156 m), pH (2, 3 and 4), current density (3.8, 4.8 and 5.8 A/dm2) and the surfactant (sodium lignosulfonate, SLS) concentration (0.3 and 1 g/l) on the tribological behaviour were investigated using a ball-on-disc tribometer at ambient conditions. Lower current density, smaller particle size and higher concentration of MoS2 decreased COF. While increasing the surfactant concentration decreased the COF, its friction lowering effect was much more pronounced at relatively lower concentrations of MoS2 in the electrolyte.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Surface Science and Engineering (IJSURFSE):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com
Our Blog 
Follow us on Twitter 
Visit us on Facebook