Multi-objective optimisation of cryogenic turning process using Taguchi-based grey relational analysis
by P. Sivaiah; D. Chakradhar
International Journal of Machining and Machinability of Materials (IJMMM), Vol. 19, No. 4, 2017

Abstract: Cryogenic machining is a sustainable manufacturing approach; it eliminates coolant disposal cost, health problems compared to the conventional flood cooling. The present study investigates the multiple response optimisation of turning process while machining AISI 17-4 PH stainless steel under the cryogenic environment (jetting of liquid nitrogen at -196°C at the rake face of the tool) by using Taguchi-based grey relational analysis. The optimum levels of the machining parameters are cutting speed at 120.89 m/min, feed rate at 0.048 mm/rev, depth of cut 0.4 mm and physical vapour deposition (PVD) AlTiN coated tungsten carbide (WC). Taguchi-based grey relational analysis method reduced the cutting forces by 7.75%, improved the surface finish by 55.87%, and increased the material removal rate (MRR) by 154.76% and 25% increased the tool flank wear in cryogenic turning process. From the analysis of variance, it was identified that feed rate is the most influenced process parameter on turning performance characteristics.

Online publication date: Mon, 28-Aug-2017

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Machining and Machinability of Materials (IJMMM):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com